Using the Realwear HMT-1

General tips

  • When not in use, power off the device or put it to sleep. See more info on power options and sleep mode.
  • Store the device in a cool, dry place on a level surface

Getting started

This video will help you get started with the Realwear HMT-1 smart glasses.

Read guide as text

The screen of the HMT-1 should be positioned on the side of your dominant eye, so that you will have a better time reading the user interface. First, you should figure out which eye is dominant for you.

Determining your dominant eye

Form a triangle with your hands, and look at any object in the distance through it. Try looking at the object with one eye at a time. Using your non-dominant eye, the object should appear to move. When looking with your dominant eye, the object appears at the same position as when both of your eyes are open.

If the screen is on the side of your non-dominant eye, rotate the boom arm down and flip the device over.

You can also adjust the tightness of the head strap for a better fit.

Press and hold the power button for 3 seconds. The Realwear logo should appear on the screen, and you’re good to go!

1. Power-up HMT-1 smart glasses

HMT 1 Detail PowerButton

2. Say “My programs”

1 My Programs

3. Say “Teams”. Teams will open to the prewious logged in account.

2 Teams

4. Choose the person you want to make a call, from the contact list.

Option a:

Say Select item ….” and the number referring to the person.

3 Call

Note: If the person is not found on the list continue to option b.

Option b:

Say “MAKE CALL”

4 Make a call

New window will open.

Using phonetic alphabet spell the name you went to contact letter by letter.

5 Insert name

The name will appearon “Directory contacts” section.

6 dictionary contacts B

Close the phonetic alphabet view by saying  “Accept”

6 dictionary contacts A

Say “Select item…” and the number referring to the person you want to call.

7 Call

The call will start.

More information

The HMT-1 is controlled by voice commands. To navigate a page or open an applixation, simply speak aloud the text you see on the screen.

Saying “SHOW HELP” anytime shows a list of global voice commands and any contextually unique voice commands.

You can watch this video or follow the guidelines below.

This procedure is necessary only the very first time you want to login in to your Microsoft Teams account on the HMT-1. After doing it once, you won’t need to do it again, unless you logout from the app.

1. Download the RealWear Companion app on your smart phone via Google Play Store or Apple’s App Store

Note: both devices (HMT-1 and smartphone) need to be connected to the same Wi-Fi

2. On the HMT-1, go to Teams login screen

Say “My Programs” > “ Teams” > “Sign in”.

When asked to insert your email address, say “More Options” > “Scan code” and you will be able to scan a QR code, which you will create next.

3. In the Companion app, generate a new QR code with your Teams login information.

12 L RW companion

4. Login to Teams by scanning the code on the HMT-1

Scan the QR code with the camera and say “Accept”. Teams will login to your account.

12 M RW companion

If you wear eye-glasses to operate a computer, or eye protection for your work, continue to wear the same glasses or eye protection while using HMT. While HMT devices are designed to work well with or without eye-glasses or eye protection, RealWear recommends wearing eye protection while using an HMT.

Battery level

The battery level is shown on an icon in the top right corner of the HMT-1 interface. It can also be determined from the color of the power button LED:

  • A Red light on the power button LED means the battery is extremely low or dead.
  • A Yellow light means the battery is less than 100% and charging.
  • A Green light means the battery is full.

To recharge the battery:

  1. Connect the USB Type-C charging cable to the Type-C USB port located under the rubber lid on the rear of the boom-side housing. Using the USB-C cable and USB C port will ensure the shortest charging time.

2 B HMT 1 charging basics

You can access power options from any screen by saying “MY CONTROLS”, “POWER OPTIONS”. From here you can “POWER OFF” the device, or put it to sleep with “SLEEP NOW”.

You can wake the device again by pressing the power button.

Voit herättää laitteen uudestaan painamalla virtanäppäintä.

From the home screen, say ‘My Controls’ to launch the Control Panel, then say ‘Flashlight on’ to power on the forward-facing flashlight. Say ‘Flashlight off’ to turn off the flashlight.

The ‘Flashlight On’ , joissa fyysinen maailma suljetaan virtuaalilasien tai -kypärän avulla kokonaan pois. ‘Flashlight Off’ commands will also work in the ‘My Camera’ application while taking photos or videos.

realwear hmt Flashlight

  1. Say ‘My Controls’
  2. Say ‘Select Volume 1-5’ where ‘1’ is the quietest and ‘5’ is the loudest setting.
  1. Say ‘My Controls’
  2. Say ‘Select Brightness 1-5’ where ‘1’ is the darkest and ‘5’ is the brightest setting.

1. Take the HMT-1 and the hard cap

IMG 20220223 170342

2. Fit the HMT-1 and the Tri-Band Strap (already attached to the device) over the top of the cap

TriBand Strap

3. Slide the cap brim clips onto the brim of the cap on both sides.

Brim clips 2 N

Brim clips N

4. Move the adjustment buckles as needed for best fit.

Buckles

IMG 20220223 171211

5. You can now ready to wear the hard hat + HMT-1.

Wear 30.5x

Troubleshooting

Your HMT-1 should be already configured for the right network. However, if the connection is lost, and the network itself is working, you can try connecting again through these steps.

  1. Say ‘My Controls’ to launch the control panel
  2. Say ‘Set Wi-Fi’ to open a list of available networks
  3. Say the name of the desired network to select it from the list of available networks.
  4. Say ‘Set Password’ to bring up the speech menu. For the most reliable text entry, say ‘Switch Mode’ and speak the military code for the corresponding characters of your password to enter.

LETTERS – Say Switch Mode (This will switch the letter entry mode to the military alphabet with corresponding characters displayed on the screen).The two and three syllable commands will make for more accurate text entry.The letter commands can be spoken quickly sequentially e.g. Alpha Bravo Charlie Delta. There is no need to pause after one letter is entered.

NUMBERS – To enter numbers, use the prefix ‘Number’. e.g. ‘Number 1 2 3 4 5’ will appear as ‘12345’

SYMBOLS – To enter symbols, use the prefix ‘Symbol’. e.g. ‘Symbol At Pound Dash Period’ will appear as ‘@#-.’Saying ‘All Symbols’ will display the commands for every available symbol.

You can also use the “Configure” function on the Realwear Companion app to connect to Wi-Fi.

If you didn’t find what you were looking for, please check the RealWear Support page.

Walki logo
Stereoscape-Logo-Secondary-White-2018

Tilaa uutiskirje